Gigabyte GA-C1037UN-EU (rev. 1.0) F2

Download BIOS and System Update drivers from GigaByte for Windows 7

Gigabyte GA-C1037UN-EU (rev. 1.0) driver from Gigabyte for Windows 9X, Windows ME, Windows NT, Windows 2K, Windows XP, Windows 2003, Windows Vista, Windows XP 64 bit, Windows 2008, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64

Developer:............ GigaByte
File size:.............. 3 KB
Downloads:......... 730
Release date:...... 13 Mar 2014
Last update:........ 13 Mar 2014

Download Gigabyte GA-C1037UN-EU (rev. 1.0) F2

Publisher review for Gigabyte GA-C1037UN-EU (rev. 1.0) F2:

Before install Gigabyte GA-C1037UN-EU (rev. 1.0) F2you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Gigabyte GA-C1037UN-EU (rev. 1.0). We recommend to always use most recent version of a driver.

Specifications:

- CPU
Built in with an Intel Dual-core Celeron 1037U processor (1.8 GHz)
2 MB L3 cache

- Chipset
Intel NM70 Chipset

- Memory
2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
Dual channel memory architecture
Support for DDR3 1600/1333 MHz memory modules

- Onboard Graphics
Integrated Graphics Processor:
1 x D-Sub port
1 x HDMI port, supporting a maximum resolution of 1920x1200
Support for HDMI 1.4 version.
Maximum shared memory of 1 GB

- Audio
Realtek ALC887 codec
High Definition Audio
2/4/5.1/7.1-channel

- LAN
2 x Realtek GbE LAN chips (10/100/1000 Mbit)
Teaming is not supported.

- Expansion Slots
1 x PCI slot

- Storage Interface
Chipset:
1 x SATA 6Gb/s connector (SATA3 0)
2 x SATA 3Gb/s connectors (SATA2 1~2)
1 x eSATA 3Gb/s connector on the back panel
JMicron JMB368 chip:
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices

- USB
Chipset:
8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

- Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
1 x IDE connector
1 x SATA 6Gb/s connector
2 x SATA 3Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
2 x USB 2.0/1.1 headers
1 x parallel port header
1 x serial port header
1 x Clear CMOS jumper
1 x chassis intrusion header

- Back Panel Connectors
1 x PS/2 keyboard port
1 x PS/2 mouse port
1 x D-Sub port
1 x serial port
1 x HDMI port
4 x USB 2.0/1.1 ports
1 x eSATA 3Gb/s connector
2 x RJ-45 ports
3 x audio jacks (Line In, Line Out, Mic In)

- I/O Controller
iTE I/O Controller Chip

- H/W Monitoring
System voltage detection
CPU/System temperature detection
CPU/System fan speed detection

- BIOS
2 x 32 Mbit flash
Use of licensed AMI EFI BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Fixes:
- Improve System compatibility



Operating system:
Windows 9X, Windows ME, Windows NT, Windows 2K, Windows XP, Windows 2003, Windows Vista, Windows XP 64 bit, Windows 2008, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit

Copyright (c) 2024 ++ win7dwnld.com - All rights reserved. - 0.0444 s